ÖĞÎİæ
    Current Location:HOME->Standards and Reports->Standards->Water->Method Standard
Technical specifications for validity of wastewater on-line monitoring data (on trial)
HJ/T 356£­2007 Putting into effect as of August 1, 2007
Abstract:
This standard is developed for the purpose of implementing the Law of the People's Republic of China on Environmental Protection, the Law of the People's Republic of China on the Prevention and Control of Water Pollution, implementing the monitoring of total discharge of pollution sources and standardizing technical requirements for judging on-line monitoring data of water pollution sources. This standard specifies the quality requirement for such monitoring data as COD, Cr, NH3-N, TP, pH, temperature and flow-rate of waste water of water pollution sources£¬data validity judging method as well as the method to treat lost data. This standard is applicable to the judgment of the validity of such monitoring data as COD, Cr, NH3-N, TP, pH, temperature and flow-rate of waste water of water pollution sources. Developed for the first time, this standard is a guiding standard.

Technical specifications for validity of wastewater on-line monitoring data (on trial) (HJ/T 356£­2007)

  ¡¾ Big¡¡Medium-sized¡¡Small ¡¿¡¡ ¡¾Print¡¿ ¡¾Close¡¿  
Sponsored by MEP, Address: No.115 Xizhimennei Nanxiaojie, Beijing (100035)
Telephone Numbers for Administrative Offices