İ
    Current Location:Homepage->Inventory->Catalogue for Newly-released Environmental Regulations and Standards
Environmental Standards Putting into Effect as of July 1, 2008
2008-07-18
Article type: Translated
State Environmental Protection Standards
Limits and Measurement Methods for the Emissions of Pollutants from Motorcycles on the Running Mode (CHINA stage III) (GB 14622-2007)The standard stipulates the emission limits and measurement methods for the emissions of pollutants from two or three-wheeled motorcycles on the running mode, the requirements on the emission of crankcase pollutants and the requirements on the durability of pollution control equipment.
The standard stipulates the requirements on stage III type verification and the methods for the checkup and determination on production conformity for two or three-wheeled motorcycles.
This standard is applicable to two or three-wheeled motorcycles equipped with ignition engine with the complete vehicle kerb mass no more than 400kg, the engine displacement over 50mL or the designed maximum speed over 50km/h.
This standard shall replace GB 14622-2002 standard upon its effective date.
Limits and Measurement Methods for Emissions of Pollutants from Mopeds on the Running Mode (CHINA stage III) (GB18176-2007)The standard stipulates the emission limits and measurement methods for the emissions of pollutants from two or three-wheeled mopeds on the running mode, the requirements on the emission of crankcase pollutants and the requirements on the durability of pollution control equipment.
The standard stipulates the requirements on stage III type verification and the methods for the checkup and determination on production conformity for two or three-wheeled mopeds.
This standard is applicable to two or three-wheeled mopeds equipped with ignition engine with the complete vehicle kerb mass no more than 400kg, the engine displacement over 50mL or the designed maximum speed over 50km/h.
This standard shall replace GB 18176-2002 standard upon its effective date.
Limits and Measurement Methods for Evaporative Pollutants from Motorcycles and Mopeds (GB 20998-2007)This standard stipulates the limits and measurement methods for evaporative pollutants from motorcycles and mopeds.
This standard stipulates the requirements on the type verification and the methods for the checkup and determination on production conformity of evaporative pollutants from motorcycles and mopeds.
This standard is applicable to motorcycles and mopeds (hereinafter jointly referred to as motorcycles) fuelled by gasoline.
Standard for Pollution Control on the Landfill Site of Municipal Solid Waste (GB 16889-2008)This standard stipulates the requirements on the siting, design and construction, conditions for wastes eligible for landfill and the pollution control and monitoring during the operation, closedown and post maintenance of landfill sites of municipal solid wastes.
This standard is applicable to the pollution control and supervision over the maintenance and management during the construction, operation and closedown of landfill sites of municipal solid wastes. Some provisions of this standard are also applicable to the construction and operation of municipal solid waste transfer stations constructed as supporting facilities of landfill sites of municipal solid wastes.
The Standard for Pollution Control on the Landfill of Municipal Solid Waste (GB16889-1997) shall be abolished upon the effective date of this standard.
This standard is compulsory as per the stipulation of relevant laws.
Emission Standard of Coalbed Methane/Coal Mine Gas (on trial) (GB 21522-2008)This standard stipulates the emission limit of coal mine gas as well as that of coalbed methane of coalbed methane ground development system.
This standard is applicable to the gas emission control and management of existing mines and coalbed methane ground development system as well as that of newly constructed, renovated or expanded mines and during the EIA, designing and examination for acceptance upon the completion and after the completion of coalbed methane ground development project. The standard is applicable to the pollution discharge permitted by law. The siting of newly constructed mines or coalbed methane ground development system as well as the management of existing mines or coalbed methane ground development system within special protected areas shall be conducted as per relevant provisions of Article No. 16 of the Law on the Prevention of Air Pollution of the People's Republic of China.
This standard is compulsory as per the stipulation of relevant laws.
This standard is released for the first time.
Effluent Standards of Pollutants for Heterocyclic Pesticides Industry (GB 21523-2008)This standard stipulates the discharge limit of water pollutants during the production process of heterocyclic pesticides of imidacloprid, tradimefon, carbendazim, paraquat, atrazine and fipronil.
This standard is applicable to the pollutants discharge control and management of enterprises engaged in the production of imidacloprid, tradimefon, carbendazim, paraquat, atrazine and fipronil, the EIA of construction projects as well as the design of environmental protection facilities, examination for acceptance upon the completion and the discharge control after operation for construction projects.
This standard is also applicable to the exercise of supervision and administration of pollution discharge of production enterprises by competent environmental protection authorities.
Technical Requirement for Environmental Labeling Products Aerosol insecticide (HJ/T 423-2008)This standard stipulates the limit on product toxicity, benzene series and the VOC of various types of products of aerosol insecticides.
This standard specifies the terminology and definition, basic requirements, technical contents and examination methods of environmental labeling products of aerosol insecticides. It is applicable to all types of aerosol insecticide products.
The HJBZ 20-1997 standard shall be abolished upon the effective date of this standard.
This standard is a guiding standard and is applicable to the certification of environmental labeling products of China.
Technical Requirement for Environmental Labeling Products Digital Multi-function Copier Device (HJ/T 424-2008)This standard stipulates the definition, basic requirements, technical contents and examination method for environmental labeling product of digital multi-function copier device.
This standard is applicable to copier devices using dry developer, heat fusing and plain paper with the basic function of copying such as digital copier and digital multi-function integrated copying machine (including digital multi-function copier, digital multi-function compound machine, multi-function integrated printing and copying machine and color copier).
This standard shall replace HJBZ 40-2000 standard upon its effective date.
This standard is a guiding standard and is applicable to the certification of environmental labeling products of China.
Technical Requirement for Environmental Labeling Products Kitchen Furniture (HJ/T 432-2008)This standard stipulates the requirements on environmental indicators of materials used in kitchen furniture and that on reuse of wastes generated from the production process and the packaging of the products.
This standard stipulates the terminology and definition, basic requirements, technical contents and examination methods for environmental labeling products of kitchen furniture.
This standard is applicable to kitchen furniture of various worktops and accessories except for kitchen range and sink.
This standard is a guiding standard and is applicable to the certification of environmental labeling products of China.
Technical Specification for On-board Diagnostic (OBD) System of Compression Ignition and Gas Fuelled Positive Ignition Engines of Vehicles (HJ 437-2008)This standard stipulates the technical requirements and examination methods for on-board diagnostic (OBD) system of vehicle equipped with compression engine and the compression engine as well as vehicle equipped with ignition engine and the ignition engine fuelled by natural gas (NG) or liquefied petroleum gas (LPG).
This standard is applicable to the type verification and production conformity checkup of compression (including gas fuelled ignition compression) engine and the OBD system equipped in M2, M3, N1, N2 and N3 type of vehicle with the designed speed over 25km/h as well as M1 type of vehicle with the total mass over 3500kg. The compression (including gas fuelled ignition compression) engine equipped in N1 and M2 type of vehicle can be exempted from the type verification stipulated in this standard should such vehicles have already undergone the OBD system type verification as per the stipulation of Limits and Measurement Methods for Emissions from Light-Duty Vehicles (GB18352.3-2005).
This standard is released for the first time.
Durability of Emission Control Systems of Compression Ignition and Gas Fuelled Positive Ignition Engines of Vehicles (HJ 438-2008)This standard stipulates the technical requirements (including measurement methods) over the durability of emission control system of vehicle equipped with compression engine and the compression engine as well as vehicle equipped with ignition engine and the ignition engine fuelled by natural gas (NG) or liquefied petroleum gas (LPG).
This standard is applicable to the type verification over the durability of emission control system of compression (including gas fuelled ignition compression) engine and the OBD system equipped in M2, M3, N1, N2 and N3 type vehicle with the designed speed over 25km/h as well as M1 type vehicle with the total mass over 3500kg. The relevant requirements of this standard can be exempted for N1 and M2 type of vehicle equipped with compression (including gas fuelled ignition compression) engine should such vehicles meet the technical requirements on durability of Limits and Measurement Methods for Emissions from Light-Duty Vehicles (GB18352.3-2005).
This standard is released for the first time.
In-service Conformity of Compression Ignition and Gas Fuelled Positive Ignition Engines of Vehicles (HJ 439-2008)This standard stipulates the technical requirements on the in-service/engine conformity of vehicle equipped with compression engine and the compression engine as well as vehicle equipped with ignition engine and the ignition engine fuelled by natural gas (NG) or liquefied petroleum gas (LPG).
This standard is applicable to the checkup of in-service/engine conformity of compression (including gas fuelled ignition compression) engine and the OBD system equipped in M2, M3, N1, N2 and N3 type of vehicle with the designed speed over 25km/h as well as M1 type of vehicle with the total mass over 3500kg. The relevant requirements of this standard can be exempted for N1 and M2 type of vehicle equipped with compression (including gas fuelled ignition compression) engine should such vehicles have undergone the in-service conformity checkup as per the Limits and Measurement Methods for Emissions from Light-Duty Vehicles (GB18352.3-2005).
This standard is released for the first time.
The following standards shall be abolished upon the effective date of the aforesaid standards:
Limits and Measurement Methods for Exhaust Emissions from Motorcycles under Running Mode (GB 14622-2002)
Limits and Measurement Methods for Exhaust Emissions from Mopeds under Running Mode (GB 18176-2002)
Standard for Pollution Control on the Landfill Site for Domestic Waste (GB 16889-1997)
Technical Requirement for Environmental Labeling Products-Healthy Aerosol Insecticide (HJBZ 20-1997)
Technical Requirement for Environmental Labeling Products-Copier (HJBZ 40-2000)
(This English version is for your reference only.In case any discrepancy exists between the Chinese and English context, the Chinese version shall prevail.)
  BigMedium-sizedSmall Print Close  
Sponsored by MEP, Address: No.115 Xizhimennei Nanxiaojie, Beijing (100035)
Telephone Numbers for Administrative Offices