Hot Keywords: inspection air water soil pollution 
Home > Resources > Standards > Air > Emission Standard for Mobile-source Pollutants
Limits and measurement methods for exhaust pollutants from motorcycles and mopeds under two-speed idle conditions
The current standard is formulated for the purpose of implementing Environmental Protection Law of the People's Republic of China and Law of the People's Republic of China on the Prevention and Control of Atmospheric Pollution, preventing and controlling pollution by motorcycles and mopeds and improving ambient air quality. The current standard specifies the limits and measurement methods for exhaust emissions from motorcycles and mopeds at idle speed and high idle speed. The current standard is applicable to type verification and production consistency check of motorcycles and mopeds equipped with spark ignition engine as well as check on emissions of in-service motorcycles and mopeds. The current standard is the amendment of Limits and Measurement Methods for Exhaust Emissions from Motorcycles and Mopeds at Idle Speed (GB 14621-2002). The Limits and Measurement Methods for Exhaust Emissions from Motorcycles and Mopeds at Idle Speed (GB 14621-2002) shall be nullified since the date when the current standard goes into effect.


Limits and measurement methods for exhaust pollutants from motorcycles and mopeds under two-speed idle conditions(GB 14621—2011)

(This English version is for your reference only.In case any discrepancy exists between the Chinese and English context, the Chinese version shall prevail.)

Copyright©2015-2016 www.mep.gov.cn | Statement | Sitemap | Contact us

Registration Number: 05009132

All rights reserved. The content (including but not limited to text, photo, multimedia information, etc) published in this site belongs to www.mep.gov.cn.

Without written authorization from www.mep.gov.cn, such content shall not be republished or used in any form.